ExerMetrix
Patient testing with the ExerMetrix sensor and reports on the results. What you see here depends on your account: patients see their own results, providers and practice admins their practice, sales reps the practices they manage, and system admins everything by practice.
Patient testing
Choose a patient, connect a sensor, check its calibration, then run any of the 73 tests. Results save to the patient's record on the server.
1Test list
The full test list: sensor bar on top, area chips, Left / Right buttons on each test. Shows the practice's own test list first.
4Body map
Tap the joint on a body to see its tests for that side; tested joints get a green dot.
About the testing pages
How the sensor is set up, the calibration check, 100 Hz and the upload format.
Reports
Nine reports: six for one patient, three for a group of them.
8Cohort comparison
Compare groups — by condition, provider, practice or age — on their average recovery.
Dashboards
One landing page per role, showing only what that role is responsible for.
Test setup
Which tests each patient does — set for the practice, adjusted per patient, and adjustable again mid-session.
1Practice setup
The tests every patient here gets, the conditions this practice treats, and whether the practice admin may add more.
Sensor tools
Stand-alone tools for looking after the sensors.
Sensor calibration
Check and calibrate a sensor: magnetometer, the six accelerometer positions and gyroscope, with live data and a results log.
Gait analysis
One or two ankle sensors: stride, stance and swing, cadence and left/right symmetry.
Sensor test console
Stream accelerometer, gyroscope, magnetometer and quaternions with live graphs and CSV download. Set the IMU ranges, rename a sensor, and read its battery and device info.
NDSA Firmware Explorer
Connect by Bluetooth or USB: settings, backup, firmware update and a hardware check.
NDSA Chip Check
Chip IDs, the RST and WKUP buttons, and a 2-minute drift test that saves a results file.
- Sensors need Chrome or Edge with Bluetooth on, and the page must come from https://. iPhone and iPad browsers can't use Bluetooth; the ExerMetrix iOS app can.
- Access is set by your ExerMetrix account: log in once and every page shows only the data your account may see.